THERMOSTAT BX-TE

BX-TE is the innovative push button interface equipped with an external temperature probe to perform thermostat functions.
Regarding the push button interface functions it has all the features of the BX-4XIO model, moreover it addes the necessary features to control the thermostat.
The device is developed without a display unit or local buttons, therefore, setpoint temperature adjustment and visualization can be exclusively carried out via a Blumotix supervision system like a touch panel or a common smartphone on which is installed the dedicated application.
The BX-TE is equipped with a highly sophisticated digital solid state temperature probe, able to carry out accurate measurements, from -55 °C to 125 °C with 0.5 °C of resolution, and not requiring any calibration procedure.
The temperature probe is extremely compact and can be fitted to the rear of the hole plugs of standard devices suitable for measuring towards the inside of a room.

ETS Data
– 4XIO push button interface functions
– Choice of the thermostat mode: single or double
– Command to enable thermostat with 1 bit object
– Choice of summer / winter mode using 1 bit object
– Setting of the setpoint temperature using 2 Byte object
– Current temperature reading
– On / off output data, with 1 bit object
– Additional fan-control output selectable with 3 bit or 1 Byte object

Number of inputs: 4 + temperature probe ,Power supply: via KNX bus ,Power consumption: <0,25W
Max input wires length: 10m ,Permitted wire gauge: KNX terminal (0,8mm2) ,Operating temperature: 0 – 45 °C ,Enclosure: IP20 ,Size (WxHxD): 54x44x17 mm

THERMOSTAT BX-TU

BX-TU is the innovative push button interface equipped with an external temperature and humidiy probe to perform thermostat functions, humidy and dew point temperature control.
Regarding the push button interface functions it has all the features of the BX-4XIO model, regarding the thermostat control it has all the features of the BX-TE,  it also addes the features arising from the presence of the humidity probe.
The device is developed without a display unit or local buttons, therefore, setpoint temperature adjustment and visualization can be exclusively carried out via a Blumotix supervision system like a touch panel or a common smartphone on which is installed the dedicated application.
The BX-TU is equpped with a highly sophisticated digital solid state temperature and humidity probe, able to carry out accurate measurements, from -40 °C to 125 °C with 0.5 °C of resolution for the temperature and from 0% to 100% of relative humidity measure, and not requiring any calibration procedure.
The temperature and humidity probe is extremely compact and can be fitted to the rear of the hole plugs of standard devices suitable for measuring towards the inside of a room.

ETS Data
– 4XIO push button interface functions
– BX-TE thermostat functions
– Humidity measure using 2 Byte object
– Four thresholds of humidity and of the associate alarms
– Four thresholds of dew point temperature and of the associate alarms

Number of inputs: 4 + temperature and humidity probe , Power supply: via KNX bus , Power consumption: <0,25W, Max input wires length: 10m , Permitted wire gauge: KNX terminal (0,8mm2) , Operating temperature: 0 – 45 °C , Enclosure: IP20 , Size (WxHxD): 54x44x17 mm

ENERGY METER BX-ES02

A KNX device for measuring Alternating Electrical Current. BX-ES02 measures the alternating current absorbed on an electrical line and indirectly provides the power values that can be used to determine the amount of electrical power consumed. The device has 3 analog inputs that can be used to make independent measurements of current, acquiring the values by means of BX-TA01 current clamps, which can be purchased separately.

The 3 channels can be programmed independently by ETS to carry out energy saving operations, by enabling thresholds that can be reported as events on the KNX bus. This new model includes a load monitoring function. It is possible to adjust an intervention threshold that detects overloads and intervenes to limit consumption by automatically disconnecting the programmed appliances.

Measuring Alternating Electrical Current ,3 channels ,programmable by ETS.

ENERGY METER BX-TA01

Current clamp for alternating current up to 150A.

BX-TA01 enables the absorption on a power line to be measured by induction without the need to switch off the power; it has a spring mechanism that allows it to be attached to cables with a maximum diameter of 13mm. The clamp has a sensitivity of 60A/V and allows the instrument to measure electrical current up to a maximum of 150A.

Measuring alternating current up to 150A , Sensitivity of 60A/V.