TRANSPONDER READER KNX 2 IN / 2 OUT
CODE:TR22AxxKNX
TRANSPONDER READER KNX 2 IN / 2 OUT + BELL
CODE:TR32AX9KNX

The Transponder Reader TR32Ax9KNX is an EIB/KNX wall mounting device suitable to access control application.
This device can be used in any kind of building (Hotel, Hospital, Offices, Parking, etc..) where the access control application is required.The device is equipped with two binary inputs (potential free contacts) that can be used, for instance, to control whether the door lock has been opened or closed or other signals coming from external switches/contacts (i.e. windows, bathroom emergency alarms, etc..) and with one frontal switch freely configurable by ETS. The transponder reader is equipped also with two output relays which can be used for any purposes, typically to open the door or turning on the courtesy light inside the room. The product provides on the front side four LEDs in order to enlighten 4 icons to display the following states (e.g. in case of Hotel management):
– Access Allowed/Not Allowed
– SOS request
– Service Call (clean room, etc..)
– Client status (“Busy room” or “Do not Disturb”)
The LEDs and icons can be configured in association with other alarms or events. The transponder reader can reads cards or keys at a maximum distance of 30mm from the front side.
The access control follows a sequence where the “build number” has been checked at first, then the “data” to check if it has been elapsed or not, next the password ID for client/ guest/service identification, then the enabled entrance timing window. In case card reading pass all checks the door is opened and, if set, the courtesy light inside is switched on. At the same time the Transponder Holder can send the reading response to the bus.
The device configuration for commissioning in terms of physical address, group addresses and parameters is done with ETS ( Engineering Tool Software) through a download of the Application Program.

EXTERNAL TRANSPONDER READER BLACK KNX 2 IN / 2 OUT
CODE:TR22A11KNX-EXT

The TR22A11KNX external card reader is an EIB/KNX device dedicated to access control. This product is for both 2 modules round and squared inwall boxes or for 3 modules boxes, the plexiglass front of the product is available in two different colours. The device has two physical binary inputs available for controlling the door open / close contacts or freely configurable by the user (window contacts, bathroom pull alarms etc.). The device has two relays for lock management, courtesy light control or another use. On the reader front there are 4 LEDs, 3 of which are freely configurable, usually programmed to report about: access granted, access denied, emergency, make up room, room occupied or do not disturb.

EMBEDDED PC WITH ESUITE SW
CODE:SW01D05KNX

Software for managing hotels, for supervising KNX environments and for the control of accesses and alarms. Interfaces with management and other software. Remote management via own Internet or Ethernet. The package is available also with IP, USB, IP Router Interface.

TRANSPONDER ENCODER USB BLACK
CODE:TE00A01KNX

The programming card is a transponder that reads / writes transponder cards or items. The device is fitted in a table container with 3 modules, and is equipped with a USB for the connection to a PC. It is back lighted for signalling transponder reading or writing. The reader / writer is powered up through the USB port of the PC, which must be provided with the appropriate software to allow the following read/write data: system code, password and date.

TRANSPONDER CARD – BLANK
CODE:CD00A02TRC

Dimensions and characteristics of the Card , Complies with ISO 7810 (85.6 x 54 x 0.76 mm) , Possibility of serigraphy on both sides (on request) , Dual technology version (RFID and magnetic stripe on request)

TRANSPONDER KEYHOLDER
CODE:CD00B02KNX

Dimensions and characteristics of Key chains
Dimensions and Material: ABS 38 x 34 x 6 mm
Frequency: 125KHz –
Operational temperature: -10 ° C to 50 ° C
50 PCS

INWALL HVAC HOTEL ROOM THERMOSTAT
CODE:TM10DxxKNX

The Inwall Room Thermostat TM10DxxKNX is an EIB/KNX wall mounting device designed for HVAC applications in Home and Building installations (i.e. offices, hospitals, hotels, private houses, etc..).
The device is equipped with one binary input (potential free contact) that can be used, for instance, to control the HVAC units whether a window has been opened (or closed) or for a general purpose usage.
The device configuration for commissioning in terms of physi- cal address, group addresses and parameters is done with ETS
(Engineering Tool Software) through a download of the Application Program.

09

19

29

TM11C01KNX.jpg
INWALL HVAC HOTEL ROOM THERMOSTAT
CODE:TM11DxxKNX

The Inwall Room Thermostat TM10DxxKNX is an EIB/KNX wall mounting device designed for HVAC applications in Home and Building installations (i.e. offices, hospitals, hotels, private houses, etc..).
The device is equipped with one binary input (potential free contact) that can be used, for instance, to control the HVAC units whether a window has been opened (or closed) or for a general purpose usage.
The device configuration for commissioning in terms of physi- cal address, group addresses and parameters is done with ETS
(Engineering Tool Software) through a download of the Application Program.

01

11

21

TR22A11KNX.jpg

The TR22A01KNX card reader is an EIB / KNX device dedicated to access card control with the transponder; it is customizable versatile and modular, and suitable for almost any application. Mounting boxes are embedded, rectangular or round with 2 or 3 modules.The device has two physical ON / OFF inputs available for controlling the door open / close contacts or other signals (window contacts, bathroom pull alarms etc.). The device has two relays for lock management, courtesy light control or another use. On the reader front there are 4 LEDs, 3 of which are freely configurable, and used respectively for the reporting about: access granted, access denied, emergency, required room redo, room occupied or do not disturb. The transponder reading can be made at a distance of 30 mm.ETS configuration.

01

11

21

21

11

01

The TR22A01KNX card reader is an EIB / KNX device dedicated to access card control with the transponder; it is customizable versatile and modular, and suitable for almost any application. Mounting boxes are embedded, rectangular or round with 2 or 3 modules.The device has two physical ON / OFF inputs available for controlling the door open / close contacts or other signals (window contacts, bathroom pull alarms etc.). The device has two relays for lock management, courtesy light control or another use. On the reader front there are 4 LEDs, 3 of which are freely configurable, and used respectively for the reporting about: access granted, access denied, emergency, required room redo, room occupied or do not disturb. The transponder reading can be made at a distance of 30 mm.ETS configuration.

TR22A11KNX.jpg
TRANSPONDER READER KNX 2 IN / 2 OUT
CODE:TR22AxxKNX

09

19

29