IP INTERFACE

Interface for the bidirectional data connection between Ethernet and a KNX installation. It  supports the tunneling protocol and allows the adressing, parameter setting, display, protocol and diagnosis of KNX bus devices. Bus communication module integrated. Power supply 8...24 Vac or 12...35 Vdc. Mounting in distribution board on EN 60715 rail (2 modular units, each 18 mm). Powered by the bus line. To be used in KNX installations for home and building automation.

 adressing , parameter setting , display , protocol , diagnosis of KNX bus devices

LINE/AREA COUPLER

KNX line or area coupler for connecting a bus line with a secondary one. Mounting in distribution board on EN 60715 rail (2 modular units, each 18 mm). Powered by the bus line. To be used in KNX installations for home and building automation.

 Suppress device configuration on the sub line , Enable or disable filtering of group messages ,Suppress device oriented messages , Trace the traffic on the sub line ,Reduced number of retransmissions

USB/KNX INTERFACE

Interface for the bidirectional data connection between a PC or laptop and a KNX bus installation. It enables addressing, parameter setting, visualization, protocolling and diagnosis of KNX bus devices through ETS (Engineering Tool Software). Mounting in distribution board on EN 60715 rail (2 modular units, each 18 mm). To be used in KNX installations for home and building automation.

Connection of a PC or laptop to a KNX bus installation

IP INTERFACE

IP interface for the connection of a PC or a laptop to a KNX bus installation through a LAN network. It supports the tunneling protocol. Mounting in distribution board on EN 60715 rail (2 modular units, each 18 mm). Powered by the bus line. To be used in KNX installations for home and building automation.

Adressing , parameter setting , display , protocol , diagnosis of KNX bus devices with ETS.

IP ROUTER

IP router for the connection of a PC or a laptop to a KNX bus installation through a LAN network. It supports the tunneling protocol. The bus coupler function allows to connect KNX TP bus lines through a TCP/IP backbone line. Mounting in distribution board on EN 60715 rail (2 modular units, each 18 mm). Powered by the bus line. To be used in KNX installations for home and building automation.

Adressing , parameter setting , display , protocol , diagnosis of KNX bus devices with ETS.