ROOM TEMPERATURE CONTROLLER EP2

KNX room temperature controller. To be used in KNX installations for home and building automation. Measuring of temperature through integrated sensor. Two configurable inputs. User interface with backlighted LCD and two rockers. Mounting on round or square wall box. Powered by the bus line. Terminal block for bus, screws and mounting support included in the delivery. The device has to be to completed with a set of two square rockers for room temperature controller (to be ordered separately).

Versions to be completed with a square frame of the series form or flank:
EK-EP2-TP (leds colours: blue / green) , EK-EP2-TP-RW (leds colours: red / white) , 'NF (No Frame) versions: , EK-EP2-TP-BG-NF (leds colours: blue / green) , EK-EP2-TP-RW-NF (leds colours: red / white) , 'NF (No Frame) versions with housing in white plastic: , EK-EP2-TP-BG-NFW (leds colours: blue / green) , EK-EP2-TP-RW-NFW (leds colours: red / white)

Measurement of temperature with integrated sensor with the possibility of sending the value ​​on the bus  , 2 points (ON / OFF) or proportional (PWM or continuous) room temperature regulation , Heating and cooling modes with the possibility of switching locally or via bus  , Operating modes: comfort, standby, economy and building protection with separate setpoints for heating and cooling , Automatic or manual control of fan-coil units with 2 or 4 pipes hydraulic distribution , Automatic switching of the operating mode depending on presence or opening windows  , Weighted average of the two temperature values  Display of temperature (measured, setpoint, external in °C or °F), alarms and errors (with alphanumeric coding)  , Surface temperature limiting (for radiant floor heating systems)  , Delayed start of ventilators for fan-coil units ("hot-start" function), time-scheduled or depending on the temperature of the fluid at the exchange battery  , Reporting the opening of windows  , Two inputs configurable as digital or analog

ROOM TEMPERATURE CONTROLLER EQ2

KNX room temperature controller. To be used in KNX installations for home and building automation. Measuring of temperature and relative humidity through integrated sensors. Two configurable inputs. User interface with backlighted LC-display and two rockers. Mounting on round or square wall box. Powered by the bus line. Terminal block for bus, screws and mounting support included in the delivery. The device has to be to completed with a set of two square rockers for room temperature controller (to be ordered separately).

Versions to be completed with a square frame of the series form or flank:
EK-EQ2-TP (leds colours: blue / green) , EK-EQ2-TP-RW (leds colours: red / white) , 'NF (No Frame) versions: , EK-EQ2-TP-BG-NF (leds colours: blue / green) , EK-EQ2-TP-RW-NF (leds colours: red / white) , 'NF (No Frame) versions with housing in white plastic: EK-EQ2-TP-BG-NFW (leds colours: blue / green) , EK-EQ2-TP-RW-NFW (leds colours: red / white)

Measurement of temperature and relative humidity with integrated sensors with the possibility of sending values ​​on the bus  , 2 points (ON / OFF) or proportional (PWM or continuous) room temperature regulation , Heating and cooling modes with the possibility of switching locally or via bus 
• Operating modes: comfort, standby, economy and building protection with separate setpoints for heating and cooling , Automatic or manual control of fan-coil units with 2 or 4 pipes hydraulic distribution , Automatic switching of the operating mode depending on presence or opening windows  , Sending on the bus of the condition (inside or outside of the comfort area, adjustable)  , Weighted average of the two temperature values  , Calculation of dew point temperature and perceived temperature  , Display of temperature (measured, setpoint, perceived, external in °C or °F), relative humidity (measured and setpoint in %), CO2 concentration (in ‰), alarms and errors (with alphanumeric coding)  , Surface temperature limiting (for radiant floor heating systems)  , Delayed start of ventilators for fan-coil units ("hot-start" function), time-scheduled or depending on the temperature of the fluid at the exchange battery  , Reporting the opening of windows  , Two inputs configurable as digital or analog

ROOM TEMPERATURE CONTROLLER 71 SERIES

KNX room temperature controller. To be used in KNX installations for home and building automation. Measuring of temperature through integrated sensor. User interface with backlighted LCD and four capacitive pushbuttons. Mounting on round or square wall box. Powered by the bus line. Terminal block for bus, screws and mounting support included in the delivery.

Versions to be completed with a square frame of the series form or flank:
EK-E72-TP , 'NF (No Frame) versions: , EK-E72-TP-NF (black side profile) , EK-E72-TP-NFW (white side profile)

SINGLE INSTALLATION
The device has to be completed with a square plate EK-PQS-... (to be ordered separately).

DOUBLE INSTALLATION
The device may be also installed in combination with:
a pushbutton of the 71 series and completed with a 2-fold plate EK-P2S-... and a 2-fold form or 2-fold flank frame; , a flush-mounted insert with standard 55x55 mm modularity and completed with a 2-fold plate EK-P2G-... and a 2-fold form or 2-fold flank frame. Plate and frame have to be ordered separately.

Measurement of temperature with integrated sensor with the possibility of sending the value ​​on the bus 
2 points (ON / OFF) or proportional (PWM or continuous) room temperature regulation , Heating and cooling modes with the possibility of switching locally or via bus  , Operating modes: comfort, standby, economy and building protection with separate setpoints for heating and cooling , Automatic switching of the operating mode depending on presence or opening windows  , Weighted average of the two temperature values  , Display of temperature (measured, setpoint, external in °C or °F), alarms and errors (with alphanumeric coding)  , Reporting the opening of windows

ROOM TEMPERATURE CONTROLLER 71 SERIES FOR RECTANGULAR WALL BOX

KNX room temperature controller. To be used in KNX installations for home and building automation. Measuring of temperature through integrated sensor. User interface with backlighted LCD and four capacitive pushbuttons. Mounting on rectangular Italian-standard wall box. Powered by the bus line. Terminal block for bus, screws and mounting support included in the delivery.

Versions to be completed with a rectangular frame of the series form or flank:
EK-E72-TP-R , 'NF (No Frame) versions: , EK-E72-TP-NF-R (black side profile) , EK-E72-TP-NFW-R (white side profile)

The device has to be completed with a rectangular plate EK-PRS-... (to be ordered separately).

Measurement of temperature with integrated sensor with the possibility of sending the value ​​on the bus 
2 points (ON / OFF) or proportional (PWM or continuous) room temperature regulation , Heating and cooling modes with the possibility of switching locally or via bus  , Operating modes: comfort, standby, economy and building protection with separate setpoints for heating and cooling , Automatic switching of the operating mode depending on presence or opening windows  , Weighted average of the two temperature values  , Display of temperature (measured, setpoint, external in °C or °F), alarms and errors (with alphanumeric coding)  , Reporting the opening of windows