6A THREE PHASE ENERGY COUNTER

6A three phase compact energy counter for measurement of the energy and the main electrical parameters in industrial and civilian application. Optical port for communication with other systems and the Modbus RS485 (EK-MC1-MD) and KNX (EK-MC1-TP) external communication modules. MID certification for billing and metrological LED on the front panel. Wide backlighted LCD display for energies and instantaneous powers. Mounting in distribution board on EN 60715 rail (4 modular units, each 18 mm).

 For 1 or 5A CT , Programmable CT ratio , Fully bi-directional four quadrants measurements for all energies and powers , For 3 / 4 wire networks with balanced or unbalanced load , Class B according to EN 50470-3 , Tariff input , 2 S0 outputs for energy pulse emission , LCD display with 8 main digits , Optical port for communication with external modules , MID certification

6A THREE PHASE ENERGY COUNTER

80A single phase compact energy counter for the measurement of the energy and the main electrical parameters in industrial and civilian application. Optical port for communication with other systems and the Modbus RS485 (EK-MC1-MD) and KNX (EK-MC1-TP) external communication modules. MID certification for billing and metrological LED on the front panel. Wide backlighted LCD display for energies and instantaneous powers. Mounting in distribution board on EN 60715 rail (2 modular units, each 18 mm).

Direct connection up to 80 A , Fully bi-directional four quadrants measurements for all energies and powers . Class B according to EN 50470-3 , Tariff input , 2 S0 outputs for energy pulse emission , LCD display with 7 main digits , Optical port for communication , MID certification

80A THREE PHASE ENERGY COUNTER

80A three phase compact energy counter for the measurement of the energy and the main electrical parameters in industrial and civilian application. Optical port for communication with other systems and the Modbus RS485 (EK-MC1-MD) and KNX (EK-MC1-TP) external communication modules. MID certification for billing and metrological LED on the front panel. Wide backlighted LCD display for energies and instantaneous powers. Mounting in distribution board on EN 60715 rail (2 modular units, each 18 mm).

Direct connection up to 80 A , Fully bi-directional four quadrants measurements for all energies and powers , For 3 / 4 wire networks with balanced or unbalanced load , Class B according to EN 50470-3
Tariff input , 2 S0 outputs for energy pulse emission , LCD display with 8 main digits , Optical port for communication with external modules , MID certification

RS485 MODBUS COMMUNICATION MODULE

RS485 Modbus communication module to collect and transmit measurements data of ekinex single and three phase energy meters. Optical port for data transmission between counter and communication module. Data transmission on a RS485 line, using Modbus RTU or ASCII protocols. Change of RS485 parameters directly on the combined counter or by sending the proper Modbus protocol commands to the module. SET DEFAULT key to reset to factory default values all communication parameters. Two LEDs on the front provide information about power supply (POWER) status and communication (ACT/ERR) status. Mounting in distribution board on EN 60715 rail (1 modular unit = 18 mm).

RS485 side communication
Protocol: Modbus RTU (8N1) and ASCII (7E2) , Port: RS485 , Communication speed: 300 ÷ 115200 bps

Termination resistor integrated in the module

Counter side communication
 Type: serial, through optical port , Communication speed: 38400 bps

RS485 MODBUS COMMUNICATION MODULE

KNX communication module that allows to collect and transmit measurements data of ekinex single phase and three phase energy meters. Optical port for data transmission between counter and communication module. Data transmission on KNX bus line, using the KNX protocol. Programming pushbutton and LED. LED on the front for information about powering status. Mounting in distribution board on EN 60715 rail (1 modular unit = 18 mm).

KNX side communication
Protocol: KNX , Communication rate: 9600 bps

Counter side communication
Type: serial through optical port , Communication rate: 38400 bps

NETWORK ANALYSER

Multifunction three-phase compact meter (Basic version) for measurement and recording of electrical parameters. Separated inductive and capacitive counters. Communication in Modbus RTU/ASCII through RS485 port. 1 digital output (DO). Possibility to update the firmware version remotely. Auxiliary power supply (85 ... 265 Vac). Mounting in distribution board on EN 60715 rail (4 modular units, each 18 mm).

Fully bi-directional four quadrants measurements for all energies and powers
Main electrical parameters measured and displayed for a costeffective consumption analysis
Version for 1 or 5A CT , 1 MB for data recording , Possibility to record average values for active & reactive powers , Modbus RTU/ASCII communication by RS485 port , Possibility to manage the instrument in remote mode by Wintool NETME1 software

KIT 30 WITH NETWORK ANALYSER & ROGOWSKI COILS

Multifunction three-phase compact meter (Enhanced version) for measurement and recording of the electrical parameters. Separated inductive and capacitive counters. Communication in Modbus RTU/ASCII through RS485 port. 1 digital output (DO). Possibility to update the firmware version remotely.  Auxiliary power supply (85 ... 265 Vac). Mounting in distribution board on EN 60715 rail (4 modular units, each 18 mm).

The meter is delivered in combination with three Rogowski sensors (30 cm length) for detection and measurement of electric currents.

MULTIFUNCTION THREE-PHASE METER
Fully bi-directional four quadrants measurements for all energies and powers , Main electrical parameters measured and displayed for a costeffective consumption analysis , Version for 1 or 5A CT ,    8 MB for data recording , Possibility to record MIN/AVG/MAX values for all powers , MODBUS RTU/ASCII communication by RS485 port , Possibility to manage the instrument in remote mode by Wintool NETME1 software 

ROGOWSKI COIL
Suitable to measure currents from mA to hundreds of kA , High linearity , Wide dynamic range , Use with large size or awkward shaped conductors or in places with limited access , No danger from open-circuited secondary , Not damaged by large overloads , Non-intrusive (no power drawn from the main) ,  Light weight (it can be charged on the measured conductor , Totally shielded

KIT 45 WITH NETWORK ANALYSER & ROGOWSKI COILS

Multifunction three-phase compact meter (Enhanced version) for measurement and recording of the electrical parameters. Separated inductive and capacitive counters. Communication in Modbus RTU/ASCII through RS485 port. 1 digital output (DO). Possibilità di aggiornare la versione firmware dello strumento in remoto. Auxiliary power supply (85 ... 265 Vac). Mounting in distribution board on EN 60715 rail (4 modular units, each 18 mm).

The meter is delivered in combination with three Rogowski sensors (45 cm length) for detection and measurement of electric currents.

MULTIFUNCTION THREE-PHASE METER
Fully bi-directional four quadrants measurements for all energies and powers , Main electrical parameters measured and displayed for a costeffective consumption analysis , Version for 1 or 5A CT
8 MB for data recording , Possibility to record MIN/AVG/MAX values for all powers , MODBUS RTU/ASCII communication by RS485 port , Possibility to manage the instrument in remote mode by Wintool NETME1 software 

ROGOWSKI COIL
Suitable to measure currents from mA to hundreds of kA , High linearity , Wide dynamic range
Use with large size or awkward shaped conductors or in places with limited access , No danger from open-circuited secondary , Not damaged by large overloads , Non-intrusive (no power drawn from the main) , Light weight (it can be charged on the measured conductor , Totally shielded

KIT 70 WITH NETWORK ANALYSER & ROGOWSKI COILS

Multifunction three-phase compact meter (Enhanced version) for measurement and recording of the electrical parameters. Separated inductive and capacitive counters. Communication in Modbus RTU/ASCII through RS485 port. 1 digital output (DO). Possibilità di aggiornare la versione firmware dello strumento in remoto. Auxiliary power supply (85 ... 265 Vac). Mounting in distribution board on EN 60715 rail (4 modular units, each 18 mm).

The meter is delivered in combination with three Rogowski sensors (70 cm length) for detection and measurement of electric currents.

MULTIFUNCTION THREE-PHASE METER
Fully bi-directional four quadrants measurements for all energies and powers , Main electrical parameters measured and displayed for a costeffective consumption analysis , Version for 1 or 5A CT
8 MB for data recording , Possibility to record MIN/AVG/MAX values for all powers , MODBUS RTU/ASCII communication by RS485 port , Possibility to manage the instrument in remote mode by Wintool NETME1 software 

ROGOWSKI COIL
Suitable to measure currents from mA to hundreds of kA , High linearity , Wide dynamic range
Use with large size or awkward shaped conductors or in places with limited access , No danger from open-circuited secondary , Not damaged by large overloads , Non-intrusive (no power drawn from the main) , Light weight (it can be charged on the measured conductor , Totally shielded